“We bought and moved our factory into a former school building in March 2006. The building is 20,500 sq ft. in size, of which 14,000 is heated, the balance is cold warehouse storage. We have installed 1 inch P2000 to most of the ceiling in the heated area, and as the two photos show, there is an extreme difference where the P2000 has been installed (left photo). These photos were taken just minutes apart. The photo on the right is of the uninsulated area. We have had a lot of snow this winter, as you can see. The last snowfall was about two weeks before these photos were taken.
With the P2000 on the ceiling and a new energy efficient heating system, we have cut our heating costs by two-thirds, a significant part of that being the P2000. Installation is so easy, we used a spray adhesive to hold the sheets in place and then added a few screws. All of the installation was done by myself and three of my female employees.
We needed to replace 33 ft of exterior wall in which we also used 1in. P2000. The wall is a 2 x 4 frame with metal siding on the exterior, inside is 1 inch P2000 and 1/2 in gyproc. This is the warmest wall in the whole building. This is a fantastic product. We are so impressed, our company has become a sales outlet for P2000”.
Q Weinberger – Canora SK
Leave A Comment